(rmcd) high voltage bulk ceramic resistors token electronics industry co., ltd. taiwan: no.137, sec. 1, zhongxing rd., wugu district, new taipei city, taiwan, r.o.c. 24872 t el : +886 2981 0109 f ax : +886 2988 7487 china: 12f, hong xing industry bld., chuang e road, nan shan district, shen hen city, uang dong, china 518054 tel : 86 755 26055363 fax : 86 755 26055365 web: www.token.com.tw mailto:rfqtoken.com.tw version: february 24, 2017
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 1 / 4 ? product introduction features : ? peak voltage up to 74 kv, power (w) up to 100w. ? typical resistance range 75 ohm ~ 1 kohm. ? resistance tolerance k(10%). ? inductance only 0.4h max. ? heavy load characteristics . applications : ? x - ray, lasers, medical defibrillators, ? dynamic braking, soft - start/current - limit, ? radar, motor drives, broadcast transmitters, ? snubber circuits, dummy loads, energy research , ? rf amplifiers, semiconductor process, power conditioning . power high voltage dividers and resistors type rmcd extend token electronic's advanced proprietary high voltage resistor technology to larger devices than have previously been available on the market. the rmcd is the bulk non - inductive ceramic tubular resistor. because of the larger volume of resistive material, these resistors are capable of handling significantly higher pulsed power than their wire wound or metal film counterparts, making them suitable for rapid energy dump ing and high energy pulse work. this rmcd offer higher average power dissipation while retaining the advantag es of high surge energy, high voltage withstand, and non - inductance. it is especially useful in rf applications such as transmitters and modulators, where the tube configuration provides mor e effective convection cooling. in addition, this rmcd hv resistor and divider provide high peak voltage and power energy combined with extremely high working voltage. these specifications can provide important improvements in performance in many types of advanced electronic systems, including twt power supplies, radar s ystems, x - ray systems, analytical equipment an d high resolution crt displays. token will also produce devices outside these specifications to meet customer requirements, with comprehensive application engineering and design support available for customers worldwide. for complete information on quantity price and delivery, please contact our sales office , or l ink to token official website " high voltage resistors " to get more information. bulk ceramic tubular resistor offers higher energy power dissipation & higher voltage withstand.
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 2 / 4 ? genera l specifications general specifications ( rmcd ) ( unit: mm ) type dimensions (unit: mm) resistance () tolerance (%) energy (kj) peak voltage (kv) power (w) l3.0 d2.0 d2.0 rmcd - 100 305 25.4 15.5 75~1k 10 30 75 100 rmcd - 90 250 25.4 15.5 25 60 90 rmcd - 70 200 25.4 15.5 20 45 70 rmcd - 50 150 25.4 15.5 15 30 50 rmcd - 35 100 25.4 15.5 10 15 35 tubular high voltage resistors (rmcd) dimensions ? electrical characteristics electrical characteristics (rmcd) type power rating temperature coefficient resistivity specific heat inductance density max. operating temperature rmcd 35 ~ 100w - 500 ~ - 1500ppm/ 5~80?cm 2j/cm 3 0.4h max 2.25g/cm 3 220 max
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 3 / 4 ? order codes order codes (rmc d ) rmcd 100w 100r k s b part number rmcd rated power (w) 35w 50w 70w 90w 100w resistance value () 82r 82 100r 100 470r 470 820r 820 1k 1k resistance tolerance (%) k 10% silver plate terminal color b black
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 4 / 4 ? general information cost effective complete selection of high voltage components token high voltage series can be specified for use in industrial and general purpose high voltage systems, as well as a complete selection of high resistance, hi - meg, high - voltage, high frequency, and bulk ceramic resistors for higher average po wer dissipation. these high resistance, high frequency, high resistance resistors combine the proven performance of token resistance system with new cost efficient design elements and high voltage applications. detailed specifications, both mechanical and electrical, please contact our sales representative for more information. high voltage applications resistors produced from serpentine pattern screen printing design or bulk ceramic materials have displayed several key advantages in demanding high - voltag e situations, including both continuous - wave and pulse applications. these include radar and broadcast transmitters, x - ray systems, defibrillators, lasers, and high - voltage semiconductor process equipment applications, where resistors must handle peak volt age anywhere from 8kv to 75kv. typical applications include current limit in capacitor charge/discharge, crowbar, and tube - arc circuits. in these uses, bulk ceramic resistors provide low inductance, high average power per unit size, stability at high volta ge, and durability at extreme peak - power levels. film resistors typically cannot withstand high - voltage pulse applications. rf/digital loads and high - frequency applications token non - inductive voltage resistors are used extensively for high - frequency rf l oads in broadcast and communication equipment because of their non - inductive characteristics. they provide excellent non - inductive power - handling capacity at frequencies up to the gigahertz range, with no sacrifice in power dissipation. film resistors may provide the needed non - inductive characteristics required by such rf applications, but they have size limitations and present reliability problems due to potential film burnout. this is especially true in advanced digital applications such as digital radi o and tv transmitters involving pulses at high frequencies. application notes ? due to the high voltage which can appear between the end cap and any adjacent metal part, resistors should be mounted at an adequate distance from other conductors. ? an appropria te number of resistors may be screwed together as a stick to provide an assembly which will be capable to withstanding any desired voltage, providing no individual resistor is subject to a greater stress or power dissipation than is recommended in its data sheet, and that appropriate anticorona devices are fitted. ? the axial termination should not be bent closer than twice the diameter of the terminal wire from the body of the resistor. when resistors are required to be potted, the preferred encapsulant is a silicone compound. oil immersion for some high voltage applications it is required to immerse the components in oil or gas to reduce the effects of corona and surface tracking. a special lacquer protected version of the resistor is available, suitable for immersion in transformer oil or s f6.
|
